i need help an automatic power inverter - Electronic Circuits Projects Diagrams Free

nzewi007 · 28th September 2006, 06:08 AM

hello room,
i am having a little problem with a project i am building i will like any body with useful information on how i can link a battary charger circuit and a power inverter circuit together to get one a single circuit that can automatically charge the inverter circuit when it is connected to a power supply.And also act as an automatic power back up when there is power failure.Enclosed in this message is the circiuits of a automatic battery charger and a power inverter circuit.
Battery charger circuit

audioguru · 28th September 2006, 02:33 PM

Use a multiple-pole relay.
A relay driver circuit is driven from the mains and when power is present then the load and charger are connected to the mains and the inverter is disconnected from the battery.
When the power fails then the load is changed to the output of the inverter, the battery charger is disconnected and the battery is connected to the inverter.
Power will be interrupted for a moment while the relay contacts move.

Russlk · 29th September 2006, 03:07 AM

If you connect the inverter to the battery and the battery to the charger, you have a UPS (uninterruptable power supply). Why do you want to make it complicated?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Title	Starter	Forum	Replies	Latest
Power Inverter	devil666lived	General Electronics Chat	3	27th August 2006 04:38 PM
Improving Power inverter	Hussein Kkaanya	Chit-Chat	2	22nd June 2006 05:41 PM
Low Power Inverter	Electrix	General Electronics Chat	16	16th September 2005 07:29 PM
[help] Power consumption issue on bullet counter project *	Lanzer	Electronic Projects Design/Ideas/Reviews	13	26th August 2005 07:06 AM
High power inverter	rajeshkvs	Electronic Projects Design/Ideas/Reviews	0	24th November 2003 11:21 AM

28th September 2006, 02:33 PM	(permalink)
audioguru	Use a multiple-pole relay. A relay driver circuit is driven from the mains and when power is present then the load and charger are connected to the mains and the inverter is disconnected from the battery. When the power fails then the load is changed to the output of the inverter, the battery charger is disconnected and the battery is connected to the inverter. Power will be interrupted for a moment while the relay contacts move. __________________ Uncle $crooge

29th September 2006, 03:07 AM	(permalink)
Russlk	If you connect the inverter to the battery and the battery to the charger, you have a UPS (uninterruptable power supply). Why do you want to make it complicated? __________________ see my website: www.geocities.com/russlk