by
()blivion
Published on 27th October 2012 06:54 PM
I TAKE ABSOLUTELY NO RESPONSIBILITY FOR ANY INJURY, DAMAGES OR UNLAWFUL CONDUCT CAUSED BY FOLLOWING THE BELOW INSTRUCTIONS.
...
by
()blivion
Published on 18th October 2012 11:42 AM
Number of Views: 2419
Presented here is a significant step forward in simple, cheep, and efficient boost converter designs for the electronic
...
by
()blivion
Published on 29th July 2012 08:33 PM
Number of Views: 1626
A lot of times when building circuits, (such as op-amp circuits), you'll find that you need a power supply with both positive(+)
...
by
alec_t
Published on 7th August 2011 11:22 PM
Number of Views: 7741
This article describes a simple 3-transistor voltage regulator with current limiting. It is based on a conventional design
...
by
rajbex
Published on 12th July 2010 12:52 PM
Number of Views: 13526
A variable DC power supply is one of the most important tools for an electronics hobbyist. Most of the microcontroller based
...
by
mechie
Published on 5th January 2010 06:18 AM
Number of Views: 7299
A simple bench PSU capable of :-
Approx. 5v to 15v output at 1A
Current limited from about 500mA to 1A (adjustable)
Circuit Operation
An error amplifier is formed from Tr1 and Tr2, wired as a differential amplifier (often called a long-tailed pair
...
by
Hero999
Published on 5th January 2010 06:17 AM
Number of Views: 4490
Here's the plans for a power supply I'm intending to build. By my claculations it should provide me with +-15.7V@1.5A. The
...