Posted 2nd January 2009 at 10:40 AM byericgibbs (External Modules for the Oshonsoft SIM IDE)
Updated 18th January 2009 at 10:19 AM byericgibbs
This 8 keypad can be configured to control PIC inputs on the Oshonsoft PIC16F Sim, when running a program in simulation.
To run the 8KeyPad1.txt change the extension to .exe.
The Visual Basic 5 'runtime' files must be present on your PC. To get the runtime files, download from the web and install.
Invoking the *.exe will also start the PIC SIM IDE.
If you have a problem, PM me.
Posted 2nd January 2009 at 09:32 AM byericgibbs (External Modules for the Oshonsoft SIM IDE)
Updated 22nd February 2009 at 12:40 PM byericgibbs
This 4 keypad can be configured to control PIC inputs on the Oshonsoft PIC16F Sim, when running a program in simulation.
To run the 4KeyPad1.txt change the extension to .exe.
The Visual Basic 5 'runtime' files must be present on your PC. To get the runtime files, download from the web and install.
Invoking the *.exe will also start the PIC SIM IDE.
If you have a problem, PM me.
EDIT:
This module has been upgraded to Ver2 21/02/09
1. Added N/O and N/C switch contacts Option
2. Momentary and Latching Push Buttons Option
3. Ability to Edit the PB label names
4. All options are saved and recalled at power up.
NB: it is possible to have more than one of these modules running at the same time, giving the option of say 8 PB's.
Only the last one used will have its options saved.
