Interfacing USB to 8051 microcontroller - Electronic Circuits Projects Diagrams Free

sam288 · 9th July 2009, 04:18 PM

I was suggested the topic 'interfacing USB to 8051 microcontroller' as my final year project...i would like to know whether it is actually possible to do so...and the time required for completing the project..(we are required to complete it in about 6 months)...i would also be grateful if you share any information regarding the topic with me.

Pavius · 9th July 2009, 04:30 PM

I'll suggest the obvious of using a serial-USB bridge (e.g. FT232BM). This offloads all USB related management from the uC - the PC and 8051 communicate via a super simple serial interface (virtual serial over USB driver on PC and physical serial interface between the 8051 and FTDI chip).

This, of course, may not fulfill your assignment requirements.

**Nigel Goodwin** · 9th July 2009, 04:42 PM

Quote:

Originally Posted by Pavius

I'll suggest the obvious of using a serial-USB bridge (e.g. FT232BM). This offloads all USB related management from the uC - the PC and 8051 communicate via a super simple serial interface (virtual serial over USB driver on PC and physical serial interface between the 8051 and FTDI chip).

This, of course, may not fulfill your assignment requirements.

Not by a LONG, LONG way

(unless of course it's an 11 year olds school assignment?)

naveencali · 17th August 2009, 01:11 PM

Hello Mr Sam

Pavius gave U a G8 Idea of Using FT232,
I have also used the same and its very easy to use that. Otherwise U have to write a USB driver program in Microcontroller, thats not an easy task.

NaveenCali

mansi babbar · 14th September 2009, 03:32 PM

hello everyone
i m also involved in a similar project
but m nt aware of the FT232 and yes have u ppl ever worked with MTP805A?
i have started another thread for this discussion ..kindly help me this

thanks

mansi

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar
Title	Starter	Forum	Replies	Latest
KB Interfacing with 8051	muaz111111	8051/8951	2	29th October 2009 09:12 AM
interfacing dtmf decoder and 8051 microcontroller	bkamalnivas	Electronic Projects Design/Ideas/Reviews	3	4th March 2009 11:02 PM
interfacing a webcam with pc nd 8051 microcontroller	rookie007	8051/8951	3	9th June 2008 07:27 AM
interfacing 8051 with usb	kantak	General Electronics Chat	7	12th April 2005 07:43 AM
interfacing 8051 with usb	kantak	Electronic Projects Design/Ideas/Reviews	0	21st March 2005 05:58 AM

9th July 2009, 04:18 PM	#1
sam288	Interfacing USB to 8051 microcontroller I was suggested the topic 'interfacing USB to 8051 microcontroller' as my final year project...i would like to know whether it is actually possible to do so...and the time required for completing the project..(we are required to complete it in about 6 months)...i would also be grateful if you share any information regarding the topic with me.

9th July 2009, 04:30 PM	#2
Pavius	I'll suggest the obvious of using a serial-USB bridge (e.g. FT232BM). This offloads all USB related management from the uC - the PC and 8051 communicate via a super simple serial interface (virtual serial over USB driver on PC and physical serial interface between the 8051 and FTDI chip). This, of course, may not fulfill your assignment requirements. Last edited by Pavius; 9th July 2009 at 04:31 PM.

17th August 2009, 01:11 PM	#4
naveencali	Hello Mr Sam Pavius gave U a G8 Idea of Using FT232, I have also used the same and its very easy to use that. Otherwise U have to write a USB driver program in Microcontroller, thats not an easy task. NaveenCali

14th September 2009, 03:32 PM	#5
mansi babbar	hello everyone i m also involved in a similar project but m nt aware of the FT232 and yes have u ppl ever worked with MTP805A? i have started another thread for this discussion ..kindly help me this thanks mansi