Mplab 7.10 ???? - Electronic Circuits Projects Diagrams Free

Kryten · 5th May 2008, 01:06 PM

Does anyone know where i can find a downloable version of MPLAB 7.10. This as the Stoltz version (at least the hex file ICD660.hex) wont work with mplab v8.00

Plz help me if you know where to download either a hex/ bootloader that works or mplab 7.1

Kryten · 5th May 2008, 01:30 PM

Well I cant actually tell if it works or not as mplab 80 cant open the series port (im using a USB to serial adaptor)

EDIT:
error messages:
ICDWarn0027: The selected baud rate is not supported by your system. Chances are it will work anyway, but if persistent communications occur, consider switching to a lower baud rate.
ICD0019: Communications: Failed to open port: (Windows::GetLastError() = 0x2, 'Systemet finner ikke angitt fil.
')
ICD0021: Unable to connect with MPLAB ICD 2
MPLAB ICD 2 Ready

ericgibbs · 5th May 2008, 01:55 PM

hi,
This is an 'oldish' link, it may still be active.?

http://ww1.microchip.com/downloads/e...eDoc/MP701.exe

**3v0** · 5th May 2008, 02:01 PM

Two things.

Instead of downgrading MPLAB why not upgreade the firmware in the ICD2?
It is supplied with each version of MPLAB. MPLAB knows how to update the firmaware in an ICD2.

Are you sure the problem is not with the USB to RS232 adaptor?

mvs sarma · 5th May 2008, 02:57 PM

Quote:

Originally Posted by 3v0

Two things.

Instead of downgrading MPLAB why not upgreade the firmware in the ICD2?
It is supplied with each version of MPLAB. MPLAB knows how to update the firmaware in an ICD2.

Are you sure the problem is not with the USB to RS232 adaptor?

By the way, MPLAB has ver8.10 now Hope many people would have already downloaded it by now.

blueroomelectronics · 5th May 2008, 03:31 PM

As 3V0 mentioned new firmware will allow your Stolz ICD2 to work with MPLAB 8.xx

Kryten · 5th May 2008, 03:56 PM

Ok Is it the BL0101010101.hex that is in the MPLAB directory?

Dont think its anything wrong with my rs232 adaptor

edit:
Dose anyone know a fast and easy way to test if it is my rs232 adaptor??

blueroomelectronics · 5th May 2008, 03:58 PM

Yes, that's it, as long as you're using a 16F877 (non A type) Else you need a modified bootloader for the 16F877A (on my site)

Kryten · 5th May 2008, 04:11 PM

Will it work with a 16f876A??
Belive i have read some where that it was the same bootloader for 877a and 876a pleas correct me if im wrong (I aim to learn as much as i can)

blueroomelectronics · 5th May 2008, 04:36 PM

Yes same thing. It'll work for both.

Kryten · 5th May 2008, 04:42 PM

Quote:

Originally Posted by blueroomelectronics

Yes same thing. It'll work for both.

Cool

I also found a com test program at something calle B&B electronics. real sweet littlest thing so my port works for shure

blueroomelectronics · 5th May 2008, 04:49 PM

Can you post a link?

Kryten · 5th May 2008, 04:53 PM

Shure
Direct to serial port FAQ

Kryten · 6th May 2008, 08:17 AM

So little update from me.

Mplab cant "see" my rs232 serial usb adaptor (strange) so it cant open the correct port (com1)

Anyone got any ide what i can do?

**Nigel Goodwin** · 6th May 2008, 08:26 AM

Quote:

Originally Posted by Kryten

So little update from me.

Mplab cant "see" my rs232 serial usb adaptor (strange) so it cant open the correct port (com1)

Anyone got any ide what i can do?

Reassign your USB adaptor to COM1.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Latest
Help with ICD2 clone!!!!!!!!!!!!	juanbbv	Micro Controllers	17	5th April 2008 05:07 AM
Debugging 877A with MPLAB	williB	Micro Controllers	10	7th May 2007 03:53 PM
Need help badly on Inchworm and MPLAB	thushy	Micro Controllers	14	11th March 2007 06:05 PM
Some Question About Inchworm	Ayne	Micro Controllers	29	7th March 2007 03:07 AM
Inchworm project started	williB	Micro Controllers	69	5th March 2007 06:55 PM

5th May 2008, 01:06 PM	(permalink)
Kryten	Mplab 7.10 ???? Does anyone know where i can find a downloable version of MPLAB 7.10. This as the Stoltz version (at least the hex file ICD660.hex) wont work with mplab v8.00 Plz help me if you know where to download either a hex/ bootloader that works or mplab 7.1 __________________ Simplicity rules Good enought - its perfect ?? 2 Gig of free online backup space Are you a Chemist?

5th May 2008, 01:30 PM	(permalink)
Kryten	Well I cant actually tell if it works or not as mplab 80 cant open the series port (im using a USB to serial adaptor) EDIT: error messages: ICDWarn0027: The selected baud rate is not supported by your system. Chances are it will work anyway, but if persistent communications occur, consider switching to a lower baud rate. ICD0019: Communications: Failed to open port: (Windows::GetLastError() = 0x2, 'Systemet finner ikke angitt fil. ') ICD0021: Unable to connect with MPLAB ICD 2 MPLAB ICD 2 Ready __________________ Simplicity rules Good enought - its perfect ?? 2 Gig of free online backup space Are you a Chemist? Last edited by Kryten; 5th May 2008 at 01:34 PM.

5th May 2008, 01:55 PM	(permalink)
ericgibbs	hi, This is an 'oldish' link, it may still be active.? http://ww1.microchip.com/downloads/e...eDoc/MP701.exe __________________ Eric "Good enough is Perfect" PIC tutorials: Gramo's: www.digital-diy.net/ Bill's: www.blueroomelectronics.com/

5th May 2008, 02:01 PM	(permalink)
3v0	Two things. Instead of downgrading MPLAB why not upgreade the firmware in the ICD2? It is supplied with each version of MPLAB. MPLAB knows how to update the firmaware in an ICD2. Are you sure the problem is not with the USB to RS232 adaptor? __________________ search engine for electronic parts Junebug USB PIC programmer kit., USB Bit Wacker, Homepage The 15 Minute Printed Circuit Board! (+drill time) Last edited by 3v0; 5th May 2008 at 02:03 PM.

5th May 2008, 03:31 PM	(permalink)
blueroomelectronics	As 3V0 mentioned new firmware will allow your Stolz ICD2 to work with MPLAB 8.xx __________________ Bill Smart Kits build Smart People http://www.blueroomelectronics.com

5th May 2008, 03:56 PM	(permalink)
Kryten	Ok Is it the BL0101010101.hex that is in the MPLAB directory? Dont think its anything wrong with my rs232 adaptor edit: Dose anyone know a fast and easy way to test if it is my rs232 adaptor?? __________________ Simplicity rules Good enought - its perfect ?? 2 Gig of free online backup space Are you a Chemist? Last edited by Kryten; 5th May 2008 at 04:09 PM.

5th May 2008, 03:58 PM	(permalink)
blueroomelectronics	Yes, that's it, as long as you're using a 16F877 (non A type) Else you need a modified bootloader for the 16F877A (on my site) __________________ Bill Smart Kits build Smart People http://www.blueroomelectronics.com

5th May 2008, 04:11 PM	(permalink)
Kryten	Will it work with a 16f876A?? Belive i have read some where that it was the same bootloader for 877a and 876a pleas correct me if im wrong (I aim to learn as much as i can) __________________ Simplicity rules Good enought - its perfect ?? 2 Gig of free online backup space Are you a Chemist?

5th May 2008, 04:36 PM	(permalink)
blueroomelectronics	Yes same thing. It'll work for both. __________________ Bill Smart Kits build Smart People http://www.blueroomelectronics.com

5th May 2008, 04:49 PM	(permalink)
blueroomelectronics	Can you post a link? __________________ Bill Smart Kits build Smart People http://www.blueroomelectronics.com

5th May 2008, 04:53 PM	(permalink)
Kryten	Shure Direct to serial port FAQ __________________ Simplicity rules Good enought - its perfect ?? 2 Gig of free online backup space Are you a Chemist?

6th May 2008, 08:17 AM	(permalink)
Kryten	So little update from me. Mplab cant "see" my rs232 serial usb adaptor (strange) so it cant open the correct port (com1) Anyone got any ide what i can do? __________________ Simplicity rules Good enought - its perfect ?? 2 Gig of free online backup space Are you a Chemist?