Electronic Projects, forums and more.

Go Back   Electronic Circuits Projects Diagrams Free > Electronic Content > Electronic Projects

Notices


Electronic Projects A collection of small electronic circuits and projects you can build.

Reply
 
Thread Tools Display Modes
Old 13th April 2008, 08:31 AM   (permalink)
New Member
jonkbu can only hope to improve
Default

but i couldn't get the square waveform... is the problem come from the IC or the TIP31?
what i get is an unstable waveform...
jonkbu is offline   Reply With Quote
Old 13th April 2008, 08:54 AM   (permalink)
New Member
jonkbu can only hope to improve
Default

what is the transformer code?
jonkbu is offline   Reply With Quote
Old 16th April 2008, 04:35 PM   (permalink)
New Member
Myrmidon is on a distinguished road
Default

For a much easier and pre-built stunner (shocker), why not just use a disposable camera?

Remove the flash capacitor then take wires off where it was then attach to bolts/prods/screws (whatever floats your boat).

You also might want to solder the flash charger switch contacts together if you are putting the camera circuit in another enclosure.

1.5v battery gives around 1000volts. Enough for you to feel it. Up the battery to a 9v and see how ,long before you get tears in your eyes.



CAUTION!: Discharge the flash capacitor FULLY! It will bite you hard, if not kill you!

EDIT: Ah right, i see the camera shocker has been discussed. I thought that's what we were all after.
__________________
Hardcore Dance Music

Last edited by Myrmidon; 16th April 2008 at 04:47 PM.
Myrmidon is offline   Reply With Quote
Old 6th May 2008, 02:12 PM   (permalink)
New Member
Hlias is on a distinguished road
Default

I would like to know what is the difference between inducing a shock with high voltage and low current (i.e. 1800V), and inducing a shock with a high current (20mA - 100V) and low voltage.
Hlias is offline   Reply With Quote
Old 6th May 2008, 02:23 PM   (permalink)
Experienced Member
 
chemelec is just really nicechemelec is just really nicechemelec is just really nice
Default

Quote:
Originally Posted by Hlias
I would like to know what is the difference between inducing a shock with high voltage and low current (i.e. 1800V), and inducing a shock with a high current (20mA - 100V) and low voltage.
First off, That particular 1800 Volt circuit is absolutely USELESS. It has almost No Current and 1800 volts isn't enough unless you contact Bare Skin.

Second, 100 Volts at 20 mA Can Easily KILL the person.

Ideally you need High Voltage to Penitrate the persons Clothing so the person gets a Shock. And a reasonable pulse of current so it HURTS but doesn't Kill.
__________________
I No Longer accept Private Messages on here.
All Emails to me Must Contain the Word \"Electronic\" in the \"Subject Line\"
or they go Directly to my Junk Mail Folder.
Email me at: chemelec@hotmail.com
Website: http://www3.telus.net/chemelec
chemelec is offline   Reply With Quote
Old 6th May 2008, 02:26 PM   (permalink)
New Member
Hlias is on a distinguished road
Default

What I want to build is a device that has, say an electrode that I touch it with my finger and i can send an 'electric shock' but NOT painful or disturbing, justto be able to feel the 'electric sensation.
Could you suggest something?

Thank you in advance.
Hlias is offline   Reply With Quote
Old 6th May 2008, 02:28 PM   (permalink)
Experienced Member
 
audioguru is a splendid one to beholdaudioguru is a splendid one to beholdaudioguru is a splendid one to beholdaudioguru is a splendid one to beholdaudioguru is a splendid one to beholdaudioguru is a splendid one to beholdaudioguru is a splendid one to behold
Default

Everybody is different. Some people are barely alive and are killed by the slightest shock. Some people die just by thinking about being shocked.

Then you will be charged with MURDER! (Unless you can prove that the person died just before you shocked him)
__________________
Uncle $crooge
audioguru is offline   Reply With Quote
Old 6th May 2008, 04:15 PM   (permalink)
Experienced Member
Conrad_Turbo is on a distinguished road
Default

Quote:
Originally Posted by Hlias
What I want to build is a device that has, say an electrode that I touch it with my finger and i can send an 'electric shock' but NOT painful or disturbing, justto be able to feel the 'electric sensation.
Could you suggest something?

Thank you in advance.
Tell them to run around on a carpet or rub a balloon to their head. Done.
Conrad_Turbo is offline   Reply With Quote
Old 15th May 2008, 10:52 AM   (permalink)
Experienced Member
rjvh is a glorious beacon of lightrjvh is a glorious beacon of lightrjvh is a glorious beacon of lightrjvh is a glorious beacon of light
Default

Quote:
Originally Posted by Hlias
What I want to build is a device that has, say an electrode that I touch it with my finger and i can send an 'electric shock' but NOT painful or disturbing, justto be able to feel the 'electric sensation.
Could you suggest something?

Thank you in advance.
Take a pvc tube rub it a few times on the woolen pullover you're wearing and shake sombodies hand

not deadly but after several times highly anoying

Robert-Jan
rjvh is online now   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Latest
STUN GUN tripler Electronic Projects Design/Ideas/Reviews 54 5th July 2008 03:14 AM
stun gun farnoosh General Electronics Chat 0 1st June 2004 06:54 AM
stun gun farnoosh General Electronics Chat 0 1st June 2004 06:54 AM
stun gun help dstich Electronic Projects Design/Ideas/Reviews 0 21st May 2004 05:09 PM
Stun gun Arkan Electronic Projects Design/Ideas/Reviews 3 1st March 2004 12:19 PM



All times are GMT. The time now is 12:40 AM.


Electronic Circuits  |  Radio Controlled
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.